Thomas Luke Joyce — Licensed Gasfitter (New South Wales)
Licence Details
| Licence Number | 377413C |
|---|---|
| Licence Class | Advanced LP Gasfitter |
| Status | Active |
| Issue Date | 16 December 2021 |
| Expiry Date | 15 December 2026 |
| Source | NSW_FT |
This data is sourced from public government registers and may not reflect real-time changes. Always confirm licence details with NSW Fair Trading directly. How our data works · Full disclaimer.
Gasfitter Licensing in Bulli
Thomas Luke Joyce is one of 2 active gasfitters licensed in Bulli, NSW .
Across New South Wales, 452 of 547 registered gasfitters hold a currently active licence, and the median NSW gasfitter has held their licence for 16.8 years. This tradesperson has held theirs for 4 years.
What a Gasfitter Licence Means in New South Wales
Gasfitters specialise in the installation, maintenance, and repair of gas reticulation systems and gas appliances in residential, commercial, and industrial settings. In Australia, gas work is classified as high-risk and requires a specific gas fitting licence or endorsement — a general plumbing licence alone does not authorise gas work. Gasfitters connect and commission gas cooktops, ovens, hot water systems, space heaters, barbecues, and pool and spa heaters. They also install and pressure-test gas piping from the meter to the appliance, carry out gas leak detection, and service gas regulators and valves. Homeowners typically need a gasfitter when installing a new gas appliance, converting from electric to gas, extending a gas line to an outdoor kitchen, or when a gas leak or carbon monoxide concern is suspected.
A current licence puts New South Wales's regulatory framework behind the work — see how licence classes work and New South Wales licensing rules.
Hiring a Licensed Gasfitter in NSW
Before hiring any gasfitter in New South Wales, use this checklist to protect yourself and ensure you're working with a properly licensed and insured professional.
- Verify they hold a gas fitting licence, not just a plumbing licence — Gas fitting requires a separate licence or endorsement in every Australian state. A plumber without a gas fitting endorsement is not legally permitted to work on gas lines or appliances. Ask to see the gas-specific licence and verify it on the state register before any work begins.
- Ask whether they will issue a gas compliance certificate — After completing gas work, a licensed gasfitter must issue a gas compliance certificate (or gas safety certificate) and lodge it with the relevant authority. This certificate confirms the installation has been pressure-tested and is safe. Without it, your gas supplier may refuse to connect supply.
- Check if they are experienced with your specific gas type — Australia uses two main types of reticulated gas: natural gas (methane) and LPG (propane/butane). Appliances and regulators differ between the two, and incorrect conversion can be lethal. Confirm the gasfitter has specific experience with your gas type, especially in regional areas where LPG is common.
- Ask about ventilation requirements for your installation — Gas appliances require adequate ventilation to prevent carbon monoxide build-up. An experienced gasfitter will assess your space for combustion air supply and flue requirements before quoting — not discover ventilation issues after the appliance is installed.
- Confirm they carry a gas leak detector and pressure testing equipment — Professional gasfitters should carry electronic gas leak detectors and manometers for pressure testing pipework. If they rely solely on soapy water for leak detection, they may miss small leaks that an electronic detector would catch. Pressure testing newly installed pipework is mandatory under Australian Standards.
Red Flags to Watch For
- No gas compliance certificate issued after completing work — A licensed gasfitter must issue and lodge a gas compliance certificate (or gas safety certificate) for all regulated gas work. Without this document, the work is not legally compliant, your gas supplier may disconnect supply, and you have no proof the installation was pressure-tested and safe.
- Skips the pressure test on new or modified gas pipework — Australian Standards require all new or modified gas pipework to be pressure-tested before commissioning. A gasfitter who connects appliances without first conducting a documented pressure test is cutting a critical safety step that exists to detect leaks before gas flows through the system.
- Uses non-approved fittings or flexible connectors beyond their rated life — Gas fittings and flexible connectors must be approved to Australian Standards (AS 5601). Flexible gas connectors have a limited service life — typically 10 years — printed on the label. A gasfitter who installs unapproved fittings or reuses expired flexible connectors is creating a potential gas leak hazard.
Typical Gasfitter Costs in New South Wales
| Hourly Rate | $90 – $145 |
|---|---|
| Callout Fee | $75 – $125 |
| Gas cooktop installation | $210 – $525 |
| Gas hot water system install | $1,260 – $3,150 |
| Gas leak detection and repair | $160 – $420 |
Your Rights — Complaints & Disputes in New South Wales
NSW Fair Trading
How to Lodge a Complaint
- 1 Write to the tradesperson describing the problem and requesting a solution within a reasonable time (14–21 days)
- 2 If unresolved, lodge a complaint with NSW Fair Trading online or by calling 13 32 20
- 3 Fair Trading will assess your complaint and may contact the tradesperson on your behalf