Sn Metal Roof Pty Ltd — Licensed Roofer (Queensland)

Active QBaCC #15484891 Queensland
Last synced with Queensland Building and Construction Commission register: 14 February 2026
Verify directly on QBaCC

Licence Details

Licence Number 15484891
Licence Class Metal Fascias and Gutters
Status Active
Financial Category Self Certification - Builder/Trade
Source QBCC

This data is sourced from public government registers and may not reflect real-time changes. Always confirm licence details with Queensland Building and Construction Commission directly. Full disclaimer.

What a Roofer Licence Means in Queensland

Roofers install, repair, and replace the roof coverings that protect Australian homes from sun, rain, wind, and hail. The trade encompasses three distinct specialisations: roof tilers who work with concrete, terracotta, and slate tiles; roof and wall cladders who install metal sheeting such as Colorbond; and roof plumbers who fit gutters, downpipes, flashings, and roof drainage systems. Homeowners most commonly need a roofer after storm damage, when tiles crack or lift, when metal sheeting corrodes, or when gutters and downpipes fail. Roof work also arises during extensions, re-roofing projects, and solar panel installations that require roof penetrations. Because roof leaks can cause extensive damage to ceilings, walls, and electrical wiring, prompt attention to roofing issues is essential.

Roofer Licence Types in Queensland

  • Roof Tiler — Installation and repair of roof tiles (concrete, terracotta, slate)
  • Roof and Wall Cladder — Installation of metal roof sheeting and wall cladding
  • Roof Plumber — Installation of gutters, downpipes, fascia, and roof drainage

Requirements

  • Certificate III in Roof Tiling (CPC30820) or Certificate III in Roof Plumbing (CPC32620)
  • Completed apprenticeship (3–4 years depending on trade)
  • QBCC financial requirements met
  • Current public liability insurance (minimum $5 million)
  • Construction induction card (White Card)

Penalties for Unlicensed Work

Unlicensed roofing work in QLD carries fines up to $46,575 for individuals for work over $3,300 (inc. GST). QBCC can also issue stop-work orders and require rectification.

Exemptions

  • Roofing work valued under $3,300 (inc. GST)
  • Minor roof repairs such as replacing a single broken tile (like-for-like)
  • Cleaning gutters
  • Owner-builder work on your own home (with permit for work over $11,000)

The Self Certification - Builder/Trade financial category assigned to this licence determines the maximum value of work the licensee can have under contract at any one time. This category is set by Queensland Building and Construction Commission based on the licensee's assessed financial capacity.

Hiring a Licensed Roofer in QLD

Before hiring any roofer in Queensland, use this five-point checklist to protect yourself and ensure you're working with a properly licensed and insured professional.

  1. Confirm which roofing licence class they hold — Roofing spans multiple licence classes — roof tiling, roof and wall cladding, and roof plumbing are separate licences in most states. A tiler cannot legally install metal sheeting, and a cladder cannot replace terracotta tiles. Verify the licence matches your specific roof type and the work required.
  2. Ask about their fall-prevention and safety equipment — Roof work is one of the most dangerous construction activities in Australia. A professional roofer should arrive with edge protection, harnesses, and anchor points, and have a site-specific safety plan. If they propose working on your roof without any visible safety equipment, they are breaching WorkSafe regulations.
  3. Request a roof condition report before quoting repairs — Rather than accepting a quote based on a ground-level glance, ask the roofer to conduct a proper roof inspection — including checking the underside from the roof cavity if accessible. A condition report helps you understand whether spot repairs will suffice or a full re-roof is more cost-effective.
  4. Check whether they provide a manufacturer-backed warranty — Roofing material manufacturers like BlueScope (Colorbond) require accredited installers to provide manufacturer warranties on their products. Ask whether the roofer is accredited by the product manufacturer, as this can mean the difference between a 10-year and a 25-year material warranty.
  5. Ask how they will weatherproof the site during works — A partial roof removal in Australian weather can be disastrous. Ask what temporary weatherproofing measures — such as tarpaulins, staged removal, or scheduling around weather forecasts — the roofer will use to protect your home during the project.

Red Flags to Watch For

  • No fall-protection equipment visible on site — Roof work requires fall-prevention measures under Work Health and Safety legislation in every state. A roofer who climbs onto your roof without a harness, edge protection, or any safety equipment is not only breaking the law but demonstrates a disregard for safety standards that likely extends to the quality of their work.
  • Offers a suspiciously cheap "roof restoration" without inspecting the roof cavity — Door-to-door roof restoration salespeople sometimes offer low prices for a spray-and-paint job without checking the structural condition of battens, sarking, or the underside of tiles. A coat of paint on crumbling tiles does not fix the underlying problem and can mask serious issues from future buyers.
  • Cannot provide proof of manufacturer accreditation for warranty claims — If a roofer promises a 25-year Colorbond warranty but is not an accredited installer with BlueScope, the manufacturer warranty may not be valid. Always ask for written confirmation of manufacturer accreditation and ensure the warranty documentation is in your name upon completion.

Typical Roofer Costs in Queensland

Hourly Rate $70 – $120
Callout Fee $80 – $150
Roof leak repair $250 – $800
Full roof replacement (standard home) $8000 – $20000
Gutter replacement (per metre) $40 – $80

View full roofer pricing guide for Queensland →

Your Rights — Complaints & Disputes in Queensland

Queensland Building and Construction Commission (QBCC)

How to Lodge a Complaint

  1. 1 Write to the tradesperson detailing the issue and requesting rectification within a reasonable timeframe (usually 14 days)
  2. 2 If unresolved, lodge a complaint online via the QBCC website or call 139 333
  3. 3 QBCC will assess the complaint and may arrange an inspection

Read our full guide to hiring a licensed roofer →

Other Licensed Roofers Near Springfield Lakes