Prices updated February 2026

Concrete Driveway Cost in Victoria (2026)

Detailed concrete driveway cost guide for Victoria homeowners. Compare metro vs regional pricing, see what's included, and get tips from local tradies.

Metro (Melbourne)

Capital city area pricing

Low estimate $4,000

Mid estimate $8,000

High estimate $16,000

Regional Victoria

Outside capital city area

Low estimate $3,200

Mid estimate $6,600

High estimate $13,500

Prices updated February 2026 — based on aggregated data from licensed Victoria tradespeople

Cost Breakdown & Details

Labour vs Materials Split

Labour 45% Materials 55%

Typical Timeline

3–7 days

What's Typically Included

Removal and disposal of existing driveway surface
Subbase preparation and compaction
Formwork, steel reinforcement and concrete pour
Chosen finish application (broom, exposed, stamped)
Control joint cutting and curing compound

What's Typically Excluded

Stormwater drainage modifications
Retaining walls or site excavation beyond driveway area
Decorative borders or feature inlays
Council crossover or kerb modifications

Get a Personalised Estimate

Use the interactive tool below to customise your concrete driveway estimate for Victoria.

Project

State

Area

Options

Estimate

Metro or regional area?

Costs are typically higher in capital cities due to labour demand and access.

Tips for Your Concrete Driveway in Victoria

Exposed aggregate is Australia's most popular driveway finish — durable, slip-resistant and hides tyre marks well.

Always ensure steel reinforcement (SL72 mesh minimum) is included — unreinforced driveways will crack quickly.

Concrete needs 7 days to cure properly — avoid driving on a new driveway for at least a week after pouring.

Request a minimum concrete thickness of 100mm for driveways — 75mm is not sufficient for vehicle loads.

Get your concretor to check for underground services (water, gas, electrical) before excavation to avoid costly damage.

Frequently Asked Questions

How much does a concrete driveway cost in Melbourne in 2026?

In Melbourne, a concrete driveway typically costs between $4,000 and $16,000 depending on size, finish type, and site conditions. A mid-range two-car driveway with a broom finish averages around $8,000. Sloped blocks common in Melbourne's eastern suburbs may incur additional formwork and drainage costs.

What is the best concrete finish for Victoria's climate?

In Victoria's cool and changeable climate, exposed aggregate is the most popular driveway finish due to its durability and slip resistance in wet conditions. A quality penetrating sealer is essential to protect against Melbourne's frequent rain and frost in outer suburbs. Avoid highly polished or smooth finishes as they can become dangerously slippery in winter.

Do I need council approval for a driveway crossover in Victoria?

Yes, Victorian councils require a vehicle crossover permit before any driveway construction that connects to the road. Melbourne councils such as the City of Melbourne and suburban councils have specific requirements for crossover width, materials, and stormwater drainage. Some councils offer a partial rebate for crossover construction if you use their approved contractors.

Do I need a licensed concreter for a driveway in Victoria?

In Victoria, domestic building work over $10,000 must be carried out by a registered building practitioner with the Victorian Building Authority (VBA). Concreters performing driveway work should hold a registration in the relevant category. Always verify your contractor's registration on the VBA practitioner register and ensure they carry appropriate insurance.

How long does concrete take to cure in Melbourne's weather?

Melbourne's cooler temperatures mean concrete can take longer to reach full strength, particularly during winter when overnight temperatures drop near freezing. Initial set generally takes 24–48 hours, but pouring should be avoided on days below 5°C as it can weaken the final product. During Melbourne's warmer months, standard 28-day curing applies, but always ensure proper moisture retention with curing compounds.