Licensed Waterproofers in Gympie, QLD
Waterproofer Directory — Gympie, QLD
| Name | Licence # | Class | Status |
|---|---|---|---|
| Mark Andrew Richardson | 1111940 | Waterproofing | Active |
Hiring a Waterproofer in Gympie
Before hiring any waterproofer in Gympie, use this checklist to protect yourself and ensure you're working with a properly licensed and insured professional.
- Confirm they hold a waterproofing licence or endorsement — In Queensland, waterproofing requires a QBCC licence (SC - Waterproofing). In NSW, waterproofing work over $5,000 requires a Home Building Licence. In Victoria, a registered building practitioner may be required for certain waterproofing work. Ask for the licence number and verify it — waterproofing is too critical to trust to an unlicensed tradesperson.
- Ask which membrane system they use and whether it is BCA-compliant — Waterproofing membranes must comply with AS 4858 and be suitable for the application (wet area, external balcony, below-ground). Ask the waterproofer to specify the product (e.g. Ardex WPM 300, Gripset 38, Sika Multiseal) and confirm it is listed in the manufacturer's technical data sheet as suitable for your application. Different areas require different membrane types — a shower membrane is not suitable for a planter box.
- Request photographic evidence of the membrane before tiling — Once tiles are laid, you cannot see the waterproofing membrane. Ask the waterproofer to photograph the completed membrane at every stage — especially at junctions, corners, hobs, and penetrations (taps, drains, waste pipes). These photos are your evidence that the work was done correctly and are invaluable if a leak develops years later.
- Confirm they will perform a flood test before sign-off — A flood test (ponding test) involves plugging the drain and filling the waterproofed area with water for a minimum period (typically 24 hours) to verify no leaks before tiling commences. This test is required under AS 3740 for shower bases and is best practice for all wet areas. A waterproofer who skips the flood test is taking an unacceptable risk.
- Ask about their warranty and what it covers — Waterproofing failures often do not appear for several years. Ask what warranty the waterproofer provides on their workmanship (7–10 years is typical for quality operators), whether the membrane manufacturer provides a separate product warranty, and what the claims process is. Get the warranty in writing before work commences.
Get at least three quotes and compare not just price, but response time, warranty on workmanship, and whether the quote includes parts.
- Skips the flood test before allowing tiling to commence — The flood test is the only way to verify the membrane is watertight before it is permanently covered by tiles. A waterproofer who allows tiling to commence without completing a flood test is taking a gamble with your property. If the membrane has a defect, it will only be discovered when water leaks through the floor or wall — requiring costly demolition to fix.
- Applies membrane in a single coat without building up corners — AS 3740 requires waterproofing membranes to be applied in multiple coats to achieve the required dry film thickness (typically 1.0–1.5 mm). Corners, junctions, and penetrations require additional reinforcement with bond-breaker tape and extra membrane coats. A waterproofer who slaps on a single coat is creating a membrane that is too thin and will fail at the most vulnerable points.
- Cannot name the specific product being applied or its compliance standard — A professional waterproofer should be able to name the exact product, its compliance with AS 4858, and its suitability for the specific application. If the waterproofer is using an unmarked or generic product and cannot provide a technical data sheet, the membrane may not meet the National Construction Code and your building certifier may reject the work.
Typical Waterproofer Costs in QLD
Hourly Rate
$70 – $120
Callout Fee
$70 – $120
Common Jobs
| Job | Cost Range |
|---|---|
| Bathroom waterproofing (per sqm) | $50 – $100 |
| Shower recess waterproofing | $500 – $1200 |
| Balcony waterproofing | $1000 – $3000 |
Related Directories
Other Trades in Gympie
Broader Areas
Frequently Asked Questions
How much does bathroom waterproofing cost in Australia?
Waterproofing a standard bathroom (shower, floor, and hob areas) typically costs $800–$2,000 depending on the bathroom size, membrane system, and complexity of the wet area. A shower-only reseal costs $500–$1,200. Balcony waterproofing costs $50–$100 per square metre. These prices include surface preparation, membrane application, and bond-breaker installation at junctions.
How long does waterproofing last?
A correctly applied waterproofing membrane should last the life of the tiled surface — typically 15–25 years for a bathroom. However, membranes on balconies exposed to UV and thermal movement may have a shorter lifespan (10–15 years). The most common causes of premature failure are poor surface preparation, insufficient membrane thickness, inadequate treatment of corners and penetrations, and structural movement.
What is a flood test and is it required?
A flood test involves plugging the waste outlet and filling the waterproofed shower base or wet area with water to a height of 25 mm above the hob for a minimum period (typically 24 hours under AS 3740). The area is then checked for any signs of leakage below. The test is required for shower bases under the Australian Standard and is considered best practice for all wet areas.
Can I waterproof over existing tiles?
It is possible to apply certain waterproofing membranes over existing tiles (called an overlay system), but it has limitations. The existing tiles must be firmly bonded, all grout must be sound, and the drain connection must be modified. Most waterproofing specialists recommend removing existing tiles to inspect and properly prepare the substrate, especially in shower bases where the original membrane may have failed.
How do I verify a waterproofer's licence in QLD?
You can verify any waterproofer's licence using TradieVerify's free search tool or directly through the Queensland Building and Construction Commission register. Enter the waterproofer's name or licence number to confirm their licence status, class, and any disciplinary history.
How many licensed waterproofers are in Gympie?
There are currently 1 licensed waterproofers registered in Gympie, QLD. This data is sourced directly from the Queensland Building and Construction Commission register and updated regularly.