Licensed Glaziers in Mermaid Beach, QLD
Glazier Directory — Mermaid Beach, QLD
| Name | Licence # | Class | Status |
|---|---|---|---|
| Joshua Luke Kelson | 15063452 | Glass, Glazing and Aluminium | Active |
Hiring a Glazier in Mermaid Beach
Before hiring any glazier in Mermaid Beach, use this checklist to protect yourself and ensure you're working with a properly licensed and insured professional.
- Confirm the glass type meets Australian Standards for the location — Australian Standard AS 1288 mandates safety glass (toughened or laminated) in specific locations including doors, sidelights, wet areas, low-level panels, and balustrades. Ask the glazier to confirm the glass type they will install meets the Standard for your specific application — non-compliant glass is a safety hazard and may void your insurance.
- Ask about their experience with frameless glass installations — Frameless glass balustrades, pool fencing, and shower screens require precision engineering — incorrect spigot placement, inadequate glass thickness, or poor alignment can cause structural failure. If your project involves frameless glass, confirm the glazier has specific frameless installation experience and uses compliant hardware.
- Check they hold a QBCC or equivalent glazier licence — In Queensland, glazing work over $3,300 (inc. GST) requires a QBCC licence. NSW requires a licence for glazing work over $5,000. Verify the licence on the relevant state register. Glass balustrades and pool fencing are safety-critical — an unlicensed installer exposes you to significant liability.
- Ask about energy ratings if upgrading for efficiency — If you are upgrading windows for energy efficiency, ask about the glass U-value and Solar Heat Gain Coefficient (SHGC). Low-E coatings and double glazing significantly reduce heating and cooling costs. The glazier should recommend the right combination for your climate zone — what works in Melbourne differs from what suits Brisbane.
- Confirm compliance with pool fencing regulations if installing glass pool fencing — Glass pool fencing must comply with AS 1926.1 and relevant state regulations for height, gap clearances, and gate operation. The glass must be toughened safety glass of adequate thickness (typically 12 mm for frameless). Ask the glazier to confirm compliance and whether they will arrange council inspection if required.
Get at least three quotes and compare not just price, but response time, warranty on workmanship, and whether the quote includes parts.
- Proposes non-safety glass in a location that requires it — Installing standard annealed glass where AS 1288 mandates safety glass (doors, wet areas, low-level panels, balustrades) is illegal and dangerous. Annealed glass breaks into large, sharp shards that cause severe lacerations. Any glazier who suggests it is either unaware of the Standard or cutting costs at your expense.
- No documentation of glass compliance markings — Safety glass installed in Australia must carry a permanent identification mark showing the manufacturer, type (toughened or laminated), and compliance with AS/NZS 2208. If the glazier cannot show you the compliance stamp on the glass before installation, you have no way to verify it is genuine safety glass.
- Glass pool fencing installed without council inspection or non-compliant gaps — Glass pool fencing must meet strict gap and height requirements under AS 1926.1 to prevent child drowning. Gaps between panels, under panels, or around gates that exceed the maximum (typically 100 mm) are non-compliant. A glazier who installs pool fencing without measuring gaps precisely or arranging a compliance inspection is putting children at risk.
Typical Glazier Costs in QLD
Hourly Rate
$70 – $110
Callout Fee
$70 – $120
Common Jobs
| Job | Cost Range |
|---|---|
| Single window glass replacement | $150 – $400 |
| Shower screen installation | $500 – $1500 |
| Sliding door glass replacement | $300 – $800 |
Related Directories
Other Trades in Mermaid Beach
Broader Areas
Frequently Asked Questions
What is the difference between toughened and laminated glass?
Toughened (tempered) glass is heat-treated to be 4–5 times stronger than standard glass and shatters into small, relatively harmless pieces. Laminated glass consists of two sheets bonded by a plastic interlayer — when broken, the pieces adhere to the interlayer rather than falling. Both are classified as safety glass under AS 1288. Laminated glass is required for overhead glazing and is preferred where fall protection is needed, as it holds together when broken.
How much does double glazing cost in Australia?
Retrofitting double glazing typically costs $500–$1,200 per window for standard sizes, depending on the frame type and glass specification. Full-house double glazing for a three-bedroom home generally ranges from $8,000 to $20,000. While the upfront cost is significant, double glazing can reduce heating and cooling energy use by 30–50 per cent and also reduces external noise.
Can existing windows be converted to double glazing?
Some existing timber and aluminium frames can accept retrofit double-glazed units, which is cheaper than full window replacement. However, the frame must be in good condition and deep enough to accommodate the thicker unit. A glazier can assess your frames and advise whether retrofit or full replacement is more appropriate. Retrofit is not possible with most older aluminium frames.
Where is safety glass required in a home?
AS 1288 requires safety glass (toughened or laminated) in doors and sidelights, panels within 500 mm of a door, glass within 750 mm of floor level, wet areas (bathrooms and showers), balustrades and pool fencing, and overhead glazing. If you are replacing glass in any of these locations, the new glass must be safety glass — even if the original was not.
How do I verify a glazier's licence in QLD?
You can verify any glazier's licence using TradieVerify's free search tool or directly through the Queensland Building and Construction Commission register. Enter the glazier's name or licence number to confirm their licence status, class, and any disciplinary history.
How many licensed glaziers are in Mermaid Beach?
There are currently 1 licensed glaziers registered in Mermaid Beach, QLD. This data is sourced directly from the Queensland Building and Construction Commission register and updated regularly.